AE-26-1200 Williams Pinball Coil
$17.95
AE-26-1200 Williams pinball coil. This coil does not have a diode. Replacement coils and solenoids for Williams Pinball Machines.
Out of stock
Description
AE-26-1200 Williams pinball coil. This coil does not have a diode. Replacement coils and solenoids for Williams Pinball Machines. We have a large selection of coils for early mechanical and later electronic Williams games that control flippers, jet bumpers, ball kick out holes and other systems.
Be sure to replace the wires in the same position as the original coil and that the silver band on the coil diode is facing the same position as your old one. Remove and replace one wire at a time or better yet, take a picture before beginning so there will be no confusion later.
Additional information
| Weight | .5 lbs |
|---|
1 review for AE-26-1200 Williams Pinball Coil
| 5 star | 100% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
1-1 of 1 review
Add a review
AE-26-1200 Williams Pinball Coil
Your review
* Review is required
Name
* Name is required
Email
* Email is required
My AE-26-1200 was installed this weekend into my Bally Pin, and it works great!